Old IXON Cloud Support

Already using the new IXON Cloud? Look here instead.

Articles in this section

NTP server

  • Updated

Supported hardware and firmware

NTP server functionality is supported on the IXrouter3 in firmware 3.6 and up. Please upgrade your firmware if you are running an older version.

The IXrouter runs a Network Time Protocol (NTP) server, which automatically and periodically syncs its own time with the IXON Cloud.

The Real Time Clock and NTP server built into the IXrouter allows the entire machine line connected to the IXrouter to sync their time, preventing time drift. This guarantees identical internal clocks.

Time zones

NTP does not acknowledge time zones, instead it manages all time information based on UTC. To convert UTC to local time, you'll need to apply the local time zone in the PLC/HMI itself.

How can I set NTP?

In order to use NTP on your PLC and HMI, perform the following steps:

  • Enter the IXrouter's LAN IP address in the NTP settings of the PLC/HMI.

1_NTP_server.png

  • If possible, apply the correct time zone in your PLC/HMI's settings.

2_Time_zone.png

NTP and Cloud Logging

Cloud Logging timestamps are based on UTC. After pulling the data from the PLC or HMI, the data is timestamped and pushed to the cloud. Therefore, altering the local time in a PLC/HMI won't affect Cloud Logging data.